SKU DMRXO0023WGNA
0.23-Inch AMOLED Microdisplay with 640×400 Resolution, 3255 PPI and MIPI 1-Lane + I²C Interface
DMRXO0023WGNA is a silicon-based top-emitter AMOLED microdisplay series for compact near-eye display systems. The official datasheet lists full-color, monochrome white, monochrome green and monochrome red versions.
Full-color and monochrome versions use different brightness, power and lifetime conditions, so the values below are separated by version where the datasheet does so.
0.23 Inch
Microdisplay diagonal
640×400
Native resolution
3255 PPI
Pixel density
Official Documentation Reference
Official documentation includes the DisplayModule product page and datasheet for SKU DMRXO0023WGNA.
Datasheet version: V1.0.0. Created date shown in the datasheet: Nov. 10, 2025.
For parameters not clearly stated, confirm with DisplayModule before ordering or before PCB and optical design release.
MIPI 1-Lane + I²C
Interface listed in datasheet natural parameters
25Hz to 90Hz
Refresh-rate range
>10000:1
Contrast ratio listed in datasheet
0.2 g
Weight listed in datasheet
Verified Technical Specifications
The values below are taken from the supplied product page or official datasheet. Version-dependent values should be checked against the exact display color being ordered.
|
Parameter |
Specification |
|---|---|
|
SKU / Product Series |
DMRXO0023WGNA |
|
Display Technology |
Top-emitter, silicon-based active OLED microdisplay |
|
Color Versions |
Full color (C), mono white (W), mono green (G), mono red (R) |
|
Diagonal Size |
0.23 inch |
|
Resolution |
640(×3)×400 |
|
Pixel Density |
3255 PPI |
|
Pixel Size |
7.8µm × 7.8µm |
|
Pixel Arrangement |
RGB irregular hexagon |
|
Display Area |
5.06 mm × 3.29 mm / 0.23 inch diagonal |
|
FPC Structural Dimensions |
54.33 mm × 6.02 mm × 1.09 mm |
|
Interface Type |
MIPI 1-lane + I²C interface |
|
Connector Reference |
BM23PF0.8-40DP-0.35V(51) |
|
Gray Scale |
256 levels |
|
Refresh Rate |
25Hz to 90Hz |
|
Contrast Ratio |
>10000:1 |
|
Brightness Uniformity |
90% min., 95% typ. in optical characteristics table |
|
Color Gamut |
NTSC 53% min., 60% typ., 75% max. |
|
Typical Brightness by Version |
Full color: 3000 cd/m²; mono white: 6000 cd/m²; mono green: 10000 cd/m²; mono red: 10000 cd/m² |
|
Power Supply in Natural Parameter Table |
VDD DC 1.8V @ max. 15mA; VCC DC 5.0V @ max. 150mA |
|
Rated Operating Range |
VDD50: 5V typ.; VCOM: -2V typ.; VDD18: 1.8V typ. |
|
Power Consumption Reference Points |
Datasheet power table at 60Hz, all-white test picture: full color 3000 cd/m²: 145 mW typ.; full color 5000 cd/m²: 250 mW typ.; mono white 8000 cd/m²: 130 mW typ.; mono red 10000 cd/m²: 100 mW typ.; mono green 10000 cd/m²: 120 mW typ. These test brightness points are not identical to the typical-brightness row for every color version. |
|
Power Test Condition |
+25°C ±2°C, all-white test picture, working at 60Hz |
|
Operating Temperature |
-40°C to +65°C |
|
Operating Humidity |
≤85%RH, no condensation |
|
Storage Temperature |
-55°C to +90°C |
|
T50 Lifetime at Typical Brightness |
Full color: 500h; mono white: 800h; mono green: 2000h; mono red: 1000h |
|
Video Format Support |
RGB888 and RGB101010 listed in the MIPI receiver description |
|
Weight |
0.2 g |
Version Selection Notes
The DMRXO0023WGNA series has multiple display color versions. The correct version should be selected based on optical brightness target, power budget, display color requirement and expected operating profile.
Full Color Version
Use when the optical system requires RGB image content. The datasheet lists 3000 cd/m² as typical brightness for full color and also provides a separate 5000 cd/m² full-color power reference point.
Mono White Version
Use when white monochrome output is sufficient. The datasheet lists mono white typical brightness as 6000 cd/m², while the power table separately gives a mono white 8000 cd/m² power test point.
Mono Red or Green Version
Use when a single display color is acceptable and the listed typical brightness target is higher than the full-color version. Confirm selected CIE coordinates and lifetime before ordering.
Interface and Integration Details
The display uses MIPI and I²C control information from the datasheet. Final host-side settings, lane configuration and register initialization should be confirmed with the current datasheet and sample before PCB release.
MIPI Receiver
The datasheet states DPHY1.1 and DSI1.1 compliance, up to 800Mbps per data channel in high-speed mode and 10Mbps in low-power mode. The product natural parameter table lists MIPI 1-lane + I²C as the product interface.
I²C Configuration
The datasheet states the I²C slave interface supports speeds up to 400 kbps and supports single-byte or multi-byte transfers.
Power Sequence
The datasheet includes power sequence constraints. Confirm the latest timing before applying power to samples or releasing the host board.
Application Fit
The datasheet describes use in near-eye display systems when paired with an appropriate optical system. Final suitability depends on optical path design, brightness target, refresh requirement, power budget, thermal design and mechanical constraints.
AR Glasses and Near-Eye Optics
The 0.23-inch format and 3255 PPI pixel density make the product relevant for compact optical engines. Confirm optical magnification, eye box, FOV and brightness requirements.
Viewfinders and Monocular Displays
Use the resolution, refresh-rate range and interface data for early display-engine review. Confirm lens design and host timing during sample validation.
Industrial and Portable Optical Devices
For compact instruments, review operating temperature, storage rating, brightness version, lifetime and mechanical clearance before moving beyond sample evaluation.
Engineering Confirmation Checklist
Before ordering samples or starting PCB layout, confirm the items below with the latest DisplayModule documentation and the selected product version.
Electrical Setup
Confirm voltage rails, power sequence, GPIO0/SWIRE handling, reset timing, display-off state, dormancy power and host initialization code.
Mechanical Fit
Confirm connector matching, FPC clearance, bend area, active-area alignment, lens position and housing tolerance before final design release.
Touch Configuration
Touch-related pins or touch specifications may be listed, but the supplied documentation does not confirm a touch panel or touch controller IC. Confirm the exact touch configuration before ordering if your design needs touch input.
Ordering Details
The product page currently lists sample orders with immediate delivery and factory bulk lead time of 3 weeks. Confirm current stock and lead time before time-sensitive purchasing.
FAQ
Which color version should I choose?
Choose the full-color version for RGB image content. Choose mono white, mono red or mono green when the optical system only needs one display color. Brightness, power and lifetime are version-dependent.
Does this product include a touch panel?
Touch-related pins or touch specifications may be listed, but the supplied documentation does not confirm a touch panel or touch controller IC. Confirm the exact touch configuration with DisplayModule before ordering.
Can it be used for AR glasses?
The datasheet describes near-eye display use when paired with an appropriate optical system. Confirm the final display version, optical engine, brightness target, field of view and power budget during sample evaluation.
What should be confirmed before bulk order?
Confirm selected color version, brightness condition, T50 lifetime requirement, connector matching, power sequence, MIPI timing, I²C initialization and current lead time.
Download Official Datasheet
Use the official datasheet to review dimensions, interface definition, electrical parameters, optical data, power sequence notes and mechanical structure.
Confirm version-specific brightness, lifetime, connector matching, touch configuration and sample availability with DisplayModule before ordering.
Rezensionen
Es gibt noch keine Rezensionen.